MW 600

[DavesMan]

Cituji web SE: "Telefony Xperia X10, X10 mini, X10 mini pro, Vivaz, Vivaz pro a Satio plne nepodporuji funkce Track ID a Caller ID. U funkce Caller ID se cislo objevi na displeji, avsak nepropoji se s telefonnim seznamem a neobjevi se tak jmeno volajiciho."
Eili ne.

[FILIP007]

chtel bych se vas zeptat jestli funguje to zobrazovani jmen a nazvu u Elma, zkousel to nekdo?

[ToMaSoo7]

Skusal niekto do MW600 pripojit nejake kvalitnejsie sluchatka?
Uvazujem ze si MW600 kupim ale bojim sa ci mi nezdegraduju kvalitu zvuku.

[Laky7777]

NIe je nejaka sanca ako spojazdnit plnohodnotne caller ID a music ID na X10 a MW600?

[Phoenix]

NIe je nejaka sanca ako spojazdnit plnohodnotne caller ID a music ID na X10 a MW600?

Aplikace treti strany ktera by nauciala X10 lepe komunikovat s MW 600(myslim ze v tomhle je problem,nedokazu si to jinak vysvetlit)

[Hans_16]

Uvazuji o koupi techto sluchatek, ale ted jsem zde cetl, ze u Xperie X10 s nimi jsou problemy (mam Xperii X10 mini pro). Je nejaka sance, ze to SE nejak vyresi? Nebo s Androidem 2.1 uz funguji normalne? A je to tedy, ze jen neukazuji nazev pisnicky a jmeno volajiciho? A jde u tech sluchatek aktualizovat firmware, bez ztraty zaruky, pokud by ten problem SE nejak vyresily? Ted tedy nevim, jestli si je koupit nebo ne . Jinak kvalita zvuku je dobra? Diky

[Phoenix]

kvalita dobra od Se se neda ocekavat nejaka naprava ale nevim jak aktualizovat soft ve sluchatkach to snad ani mozne neni

[Laky7777]

To, ze sluchadla nepodporuju meno volajuceho a meno skladby nie je problem firmware sluchadiel, ale problem androidu. Tato funkcia nejde na MW600 ani s Desire. Ale podla referencii dumb fony nemaju problem.

[digitom]

Ahoj, prosim o radu.. vlastnim telefon xperi x10 mini pro a headset MW 600  a nejde mi s nim telefonovat, kdyz vytacim hovor vzdy je zvuk v telefonu, ikdyz jsou sluchatka pripojene, nevim jak zvuk prepnout do sluchatek....nevite nekdo co s tim?  diky

[roxetak]

Aku verziu androidu mas v xperii?

[digitom]

dneska sem instaloval nejnovejsi firmware.....tzn android 2.1 - update 1

[verbatim]

Zkus si pridrzet tlacitko prijmuti hovoru, jestli tam je vybrane aktualne sparovane zarizeni (symbol telefonu 1, nebo 2, pripadne 3) - to by mohl byt problem v pripade, ze jsi sluchatka uzival s jinym telefonem (pokud jsi headset neresetoval) Pak by to melo byt v poradku

[jarachroust]

Nevim jestli je k nastaveni nejaky navod(ja nemam) ale neprisel jsem na to jak mw600 sparovat s X10, popisete mi postup parovani? Diky

[roxetak]

A co tak si stiahnut manual v anglictine, original zo stranok SE - http://www.sonyericsson.com/cws/download/1/775/277/1269520987/MW600__UG_EN_1236-6504_1.pdf

Pairing the headset with a phone
To use the headset with a phone, you need to pair the headset with the phone. After
successful pairing, the headset connects automatically to the phone as soon as the headset
is turned on and within range.
To pair the headset with a phone
1 Make sure the headset is turned off.
2 Turn on the Bluetooth function in the phone. For instructions, see the phone User
guide.
3 Turn on Bluetooth visibility in the phone. This makes the phone visible to other
Bluetooth devices.
4 Place the phone within 20 cm (8 inches) of the headset.
5 Press and hold down on the headset for about 5 seconds until the pairing indicator
appears on the display.
6 Auto pairing in your phone: When asked to add the MW600, follow the instructions
that appear.
7 Normal pairing in your phone: Search for and add a new device.
8 If a passcode is required, enter 0000.
Pairing the headset with another device
To use the headset with another device, such as a gaming device or a PC, you need to
pair the headset with that device. After successful pairing, the headset connects
automatically to the device as soon as the headset is turned on and within range.
To pair the headset with another device
1 Make sure the headset is turned off.
2 Turn on the Bluetooth function in the other device. For instructions, see the User
guide of the other device.
3 Place the other device within 20 cm (8 inches) of the headset.
4 Press and hold down on the headset for about 5 seconds until the pairing indicator
appears on the display.
5 In the other device: Search for and add a new
6 If a passcode is required, enter 0000.

[jarachroust]

Sorry, uz jsem si nasel navod na netu. Diky za odpoved.